Zyxel-communications 5 Series Bedienungsanleitung PDF herunterladen (Seite 349)

100

101

ZyWALL 5/35/70 Series User’s Guide

Chapter 18 IPSec VPN 349

Figure 182 SECURITY > VPN > VPN Rules (Manual)

The following table describes the labels in this screen.

Table 98 SECURITY > VPN > VPN Rules (Manual)

LABEL DESCRIPTION

# This is the VPN policy index number.

Name This field displays the identification name for this VPN policy.

Active This field displays whether the VPN policy is active or not. A Yes signifies that this

VPN policy is active. No signifies that this VPN policy is not active.

Local Network This is the IP address(es) of computer(s) on your local network behind your

ZyWALL.

The same (static) IP address is displayed twice when the Local Network Address

Type field in the VPN - Manual Key - Edit screen is configured to Single Address.

The beginning and ending (static) IP addresses, in a range of computers are

displayed when the Local Network Address Type field in the VPN - Manual Key -

Edit screen is configured to Range Address.

A (static) IP address and a subnet mask are displayed when the Local Network

Address Type field in the VPN - Manual Key - Edit screen is configured to Subnet

Address.

Remote Network This is the IP address(es) of computer(s) on the remote network behind the remote

IPSec router.

This field displays N/A when the Remote Gateway Address field displays 0.0.0.0.

In this case only the remote IPSec router can initiate the VPN.

The same (static) IP address is displayed twice when the Remote Network

Address Type field in the VPN - Manual Key - Edit screen is configured to Single

Address.

The beginning and ending (static) IP addresses, in a range of computers are

displayed when the Remote Network Address Type field in the VPN - Manual

Key - Edit screen is configured to Range Address.

A (static) IP address and a subnet mask are displayed when the Remote Network

Address Type field in the VPN - Manual Key - Edit screen is configured to Subnet

Address.

Encap. This field displays Tunnel or Transport mode (Tunnel is the default selection).

IPSec Algorithm This field displays the security protocols used for an SA.

Both AH and ESP increase ZyWALL processing requirements and communications

latency (delay).

Remote Gateway

Address

This is the static WAN IP address or domain name of the remote IPSec router.

1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 834 835

Kommentare zu diesen Handbüchern

Keine Kommentare

Zyxel-communications 5 Series Bedienungsanleitung Seite 349

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Zyxel-communications 5 Series