Zyxel-communications 662HW Series Bedienungsanleitung Seite 293

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 563
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 292
Prestige 662H/HW Series User’s Guide
293 Chapter 24 Maintenance
24.7 Firmware Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
"*.bin" extension, e.g., "Prestige.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
See Chapter 40 Firmware and Configuration File Maintenance in the parts that document the
SMT for upgrading firmware using FTP/TFTP commands.
Only use firmware for your device’s specific model. Refer to the label on the bottom of your
device.
Click Firmware to open the following screen. Follow the instructions in this screen to upload
firmware to your Prestige.
Figure 143 Firmware Upgrade
The following table describes the labels in this screen.
Table 98 Firmware Upgrade
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Reset Click this button to clear all user-entered configuration information and return the
Prestige to its factory defaults. Refer to the Resetting the Prestige section.
Note: Do not turn off the Prestige while firmware upload is in progress!
Seitenansicht 292
1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 562 563

Kommentare zu diesen Handbüchern

Keine Kommentare