Zyxel-communications P-2302HWL-P1 Series Bedienungsanleitung PDF herunterladen (Seite 97)

100

101

P-2302HW/HWL-P1 Series User’s Guide

Chapter 5 Wireless LAN 97

5.4.4 WPA(2) Authentication Screen

In order to configure and enable WPA Authentication; click the Wireless LAN link under

Network to display the Wireless screen. Select WPA or WPA2 from the Security list.

Figure 43 Wireless: WPA(2)

Idle Timeout The ZyXEL Device automatically disconnects a wireless station from the wired

network after a period of inactivity. The wireless station needs to enter the

username and password again before access to the wired network is allowed. The

default time interval is 3600 seconds (or 1 hour).

Group Key Update

Timer

The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK

key management) or RADIUS server (if using WPA key management) sends a

new group key out to all clients. The re-keying process is the WPA equivalent of

automatically changing the WEP key for an AP and all stations in a WLAN on a

periodic basis. Setting of the Group Key Update Timer is also supported in WPA-

PSK mode. The ZyXEL Device default is 1800 seconds (30 minutes).

Table 37 Wireless: WPA(2)-PSK

LABEL DESCRIPTION

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 336 337

Kommentare zu diesen Handbüchern

Keine Kommentare

Zyxel-communications P-2302HWL-P1 Series Bedienungsanleitung Seite 97

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Zyxel-communications P-2302HWL-P1 Series