Zyxel-communications P-2602HW(L) Series Bedienungsanleitung PDF herunterladen (Seite 259)

100

101

P-2602H(W)(L)-DxA Series User’s Guide

Chapter 19 Bandwidth Management 259

19.8 Bandwidth Management Rule Setup

You must use the Bandwidth Management Summary screen to enable bandwidth

management on an interface before you can configure rules for that interface.

Click Advanced > Bandwidth MGMT > Rule Setup to open the following screen.

Figure 137 Bandwidth Management: Rule Setup

The following table describes the labels in this screen.

Max

Bandwidth

Usage

Select this check box to have the ZyXEL Device divide up all of the interface’s

unallocated and/or unused bandwidth among the bandwidth classes that require

bandwidth. Do not select this if you want to reserve bandwidth for traffic that does not

match a bandwidth class or you want to limit the transmission speed of this interface

(see the Speed field description).

Apply Click Apply to save your settings back to the ZyXEL Device.

Cancel Click Cancel to begin configuring this screen afresh.

Table 101 Media Bandwidth Management: Summary (continued)

LABEL DESCRIPTION

Table 102 Bandwidth Management: Rule Setup

LABEL DESCRIPTION

Direction Select LAN to apply bandwidth management to traffic that the ZyXEL Device

forwards to the LAN.

Select WAN to apply bandwidth management to traffic that the ZyXEL Device

forwards to the WAN.

Select WLAN to apply bandwidth management to traffic that the ZyXEL Device

forwards to the WLAN.

Service Select a service for your rule or you can select User define to go to the screen

where you can define your own.

Priority Select a priority from the drop down list box. Choose High, Mid or Low.

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 426 427

Kommentare zu diesen Handbüchern

Keine Kommentare

Zyxel-communications P-2602HW(L) Series Bedienungsanleitung Seite 259

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Zyxel-communications P-2602HW(L) Series