Zyxel-communications PLA450 Series Bedienungsanleitung PDF herunterladen (Seite 12)

ENGLISH

4 While the devices are connecting, the power ( ) and HomePlug ( ) lights blink. Also

several times all lights blink at the same time and the HomePlug ( ) light shows red.

5 Wait for about one minute while your powerline devices connect. The power ( ) light is

steady when the ENCRYPT process times out, the HomePlug ( ) light is steady if you

have a successful connection.

V If the power ( ) light does not blink, you have probably pressed the

ENCRYPT button for too long. Try again, pressing the ENCRYPT button for

1~2 seconds.

V If the HomePlug ( ) lights on both powerline devices do not light up, the

powerline devices are not connected. Repeat steps 2 and 3 in this

section. If that doesn’t work, see the User’s Guide for more suggestions.

120 SEC.

PRESS

2 SEC.

WITHIN

PRESS

10 SEC.

PRESS

2 SEC.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 102 103

Keine Kommentare

Zyxel-communications PLA450 Series Bedienungsanleitung Seite 12