Zyxel-communications POWERLINE PL-100 Bedienungsanleitung PDF herunterladen (Seite 4)

ENGLISH

Connecting the PL-100 to a Computer

1 Connect an Ethernet cable to the port on the PL-100.

2 Connect the other end of this Ethernet cable to the Ethernet port of your

computer.

3 Plug the PL-100 into a wall socket that is near your computer.

4 Confirm that the PWR, LINK and ETHN LEDs on the PL-100 are on.

Troubleshooting

The PWR LED is off when the PL-100 is plugged into an outlet.

• Make sure the outlet is working by plugging another electric device into it. If it

is working, plug in the PL-100 again. If the PL-100 LED still does not light,

contact our technical support.

The

LINK

LED is off and the PL-100 is not detecting another Homeplug device.

1 2 3 4 5 6 7 8 9 ... 32 33

Keine Kommentare

Zyxel-communications POWERLINE PL-100 Bedienungsanleitung Seite 4