ZyXEL Communications G-170S Betriebsanweisung PDF herunterladen (Seite 46)

ZyXEL G-170S User’s Guide

46 Chapter 3 ZyXEL Utility Configuration

3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2,

WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data

encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP

encryption method. Otherwise, select DISABLE to allow the G-170S to communicate

with the access points or other peer wireless computers without any data encryption and

skip to step 6.

Figure 23 Profile: Security Setting: Encryption Type

4 The screen varies depending on the encryption method you select in the previous screen.

The settings must be exactly the same on the APs or other peer wireless computers as

they are on the G-170S. Refer to Section 3.2.2 on page 36 for detailed information on

wireless security configuration.

Figure 24 Profile: Security Setting

5 Specify a wireless protocol. Select 802.11b to have the G-170S connect to an IEEE

802.11b wireless device. Select 802.11g to have the G-170S connect to an IEEE 802.11g

wireless device. Select both to have the G-170S connect to either an IEEE 802.11g or

IEEE 802.11b wireless device.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 78 79

Keine Kommentare

ZyXEL Communications G-170S Betriebsanweisung Seite 46