ZyXEL Communications P-128MH Bedienungsanleitung PDF herunterladen (Seite 23)

DSS1000/2016/3000/5000 User’s Manual

AutoScan:

This function allows you to view each camera image in numerical

sequence under 1-Cam Display mode. Check AutoScan to enable

this function and define the scan interval from 1 to 60 seconds

(defaults 3 seconds). When in this function is enabled, you need to

return to the main menu and click

to start the AutoScan

function. During AutoScan, you can click

…

Focus Camera to jump to any camera. To stop the AutoScan

function, click

again.

4. Video

For Video Standard, you need to choose from NTSC and PAL

according to the system you are using.

5. Display & Recording Rate

With this button you can

set display and recording

rate by camera. You will

see the following dialog

box when you click this

button. There are 5

levels of display and

recording rate. Drag the

bar to adjust the display/

recording rate for each

camera.

In case All is checked, you will see that while you’re adjusting the

rate for one camera, the rate of other cameras will be adjusted at

the same time. Cameras that are adjusted together use the same

video chip on the video capture card.

DSS1000/2016/3000/5000 User’s Manual

6. 640 x 480 Resolution

The utility provides your particular demand on the better 640 x

480 resolution for the specific cameras. For DSS1000/DSS2016/

DSS3000, you can check the cameras to perform the better

resolution by clicking this button. Note that the cameras are

arranged to be sets according to the same video chip on the video

capture card. For DSS5000, you can set all cameras randomly to

perform 640 x 480 resolution. The arranged camera sets are listed

as follows:

That too many cameras were selected to be 640 x 480

resolution will result in overloading for system. For the

further information please contact to your distribution.

7. UPS (Uninterruptible Power Supply)

It enhances the security for system to warn administrators and

users if AC power fails and proceeds with system shutdown before

the end of battery backup power is reached. The UPS device should

be connected to your computer (refer to your UPS user’s guide)

before the presetting of this task.

Product Camera Sets

DSS 1004 1

DSS 1008 1

4 5

DSS 1016

12 13

DSS 2016

1,2,3,4,5,6,7,8,9,10,11,

12,13,14,15,16

DSS 3004 1

DSS 3008 1

5 2

6 3

7 4

13 2

DSS 3016

15 4

DSS 5004 1 2 3 4

DSS 5008 1

9 2

10 3

11 4

DSS 5016

5,13

6,14 7,15 8,16

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications P-128MH Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications P-128MH