ZyXEL Communications VANTAGE RADIUS 50 Betriebsanweisung PDF herunterladen (Seite 15)

Vantage RADIUS 50 Quick Start Guide

Step 2. Type the IP address of your Vantage RADIUS in the Server IP Address field.

Step 3. Type the port numbers of the external authentication and accounting servers. The default

port numbers are 1812 and 1813 respectively.

Step 4. Type a password (up to 31 alphanumeric characters) as the key to be shared between the

external authentication server and the wireless AP. The key must be the same on the

external authentication server and your wireless AP. The key is not sent over the

network.

6.2 ZyAIR G-3000 Wireless Authentication Settings Example

The following example describes how to configure a wireless AP for use with a RADIUS server.

To change your ZyAIR’s authentication settings, click the WIRELESS link under ADVANCED

and then the 802.1x/WPA tab. Configure your wireless AP to enable authentication through an

external authentication server (Vantage RADIUS).

Step 5. If your wireless client uses MD5 authentication, either choose static key exchange, or

disable dynamic key exchange.

Step 6. The authentication database contains wireless station login information. Vantage

RADIUS is an external server. Use this drop-down list box to select the order the

wireless AP checks the databases to authenticate a wireless station.

1. Enable these fields to activate

authentication and accounting services.

4. Type a shared secret (password) used to

authenticate wireless clients with your wireless AP.

3. Type the port number

of the RADIUS server.

The default port

numbers are shown.

You need not change

these values unless

your network

administrator instructs

you.

2. Enter the IP

address of the

RADIUS

server in

dotted decimal

notation.

1 2 ... 10 11 12 13 14 15 16 17

Keine Kommentare

ZyXEL Communications VANTAGE RADIUS 50 Betriebsanweisung Seite 15