ZyXEL Communications ZYWALL 35 - V4.04 Betriebsanweisung Seite 31

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 117
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 30
(3) In ZyWALL1, configure IKE and IPsec rule. Enable Nailup. Make sure the tunnel
can be built successfully.
(4) In ZyWALL2, configure IKE rule and IPsec rule correctly except Pre-shared Key.
Enable Nailup. Make sure the Tunnel couldn't build successfully.
(5) After long time run, ZyWALL_DUT will crash because of IKE SA leak.
5. [BUG FIX] SPR ID: 071023165
Symptom: "send/recv” bytes in syslog are a minus number.
Condition:
(1) Configure syslog server.
(2) Enable REPORTS->SYSTERM REPORTS->Reports.
(3) Download a file (file size is between 0xFFFFFFFF and 0x7FFFFFFF bytes)
through the ZyWALL.
(4) ZyWALL generates a syslog like following when finishing file download:
2007-10-12 16:58:31 Local1.Info 192.168.1.1 Oct 12 16:46:54
RAS src="192.168.1.33:3183" dst="172.25.21.112:21" msg="Traffic Log"
note="Traffic Log" devID="00134976F597" cat="Traffic Log" duration=11405
send=35786799 rcvd=-1813943960 dir="LAN:WAN" protoID=6 proto="ftp"
trans="Normal"
6. [BUG FIX] SPR ID: 071219091
Symptom: ZyWALL hungs when Nessus scan.
Topology:
PC1 with Nessus ---- (LAN) ZyWALL (DMZ) ----PC2 (192.168.4.33)
Condition:
(1) Install Tenable Nessus 3 (you can get it at www.nessus.org) in PC1. Updates it's
plug-in.
(2) PC1 starts Nessus by the following steps:
(a) Start Scan Task.
(b) Input PC2 IP 192.168.4.33.
(c) Enable all plug-in with default settings (Even dangerous plug-in are enabled).
(d) Scan from the local host.
(e) Scan Now.
(3) When scan finished, ZyWALL will hung.
7. [BUG FIX] SPR ID: 070614825
Symptom: Time zone is incorrect when user configures time in daylight saving time.
Condition:
(1) EWC->MAINTENANCE->Time and Date.
(2) Select Time Zone (GMT+03:00) Baghdad, Kuwait, Nairobi, Riyadh, and Moscow.
(3) Enable daylight saving, configure current time to be in daylight saving.
(4) Click on Apply.
(5) Time zone of current time showing "GMT+04:00".
(6) This problem also happens in EWC->HOME->System Information->System
Time.
Seitenansicht 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 116 117

Kommentare zu diesen Handbüchern

Keine Kommentare