ZyXEL Communications ZYWALL 70 - V4.04 Betriebsanweisung Seite 32

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 112
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 31
Source Interface=LAN
Source Starting IP Address=192.168.1.31
Source Ending IP Address=192.168.1.60
Starting Port=20, Ending Port=21
Gateway / WAN Interface=WAN2
Use another interface when the specified WAN interface is not available=disable
(4) When disconnect WAN2, PC (192.168.1.40) still can use FTP software to upload
file to the public FTP server by WAN1. It seems not match policy route.
20. [BUG FIX] SPR ID: 080110425
Symptom: DDNS will not update after change the service provider.
Condition:
(1) Setup the DDNS provider as DynDNS and make sure the WAN IP can be updated.
(2) Change the service provider with No-IP and apply it.
(3) Check with log and you can find the WAN IP will not update with No-IP service
provider.
21. [BUG FIX] SPR ID: 080108275
Symptom: PA hyperlink cannot work.
Condition:
(1) Load signature and make sure the IDP can works.
(2) In eWC >> IDP >> PA, click the signature and it will link to a website and it
always cannot find right policy for signature.
22. [BUG FIX] SPR ID: 080114612
Symptom: Dial Backup will be triggered even if traffic redirect works.
Condition:
Topology:
PC--- (LAN) ZyWALL (Dial Backup) ---Internet
| (Traffic redirect)
| (LAN) ZyWALL_B (WAN) ---Internet
(1) Enable A/P mode for ZyWALL70 and make sure WAN2 is connected.
(2) Configure traffic redirect on LAN interface to ZyWALL_B.
(3) Configure Dial Backup and Budget = always on.
(4) Confgure ZyWALL as DNS proxy server for LAN PC. Then disconnect WAN2
and PC tries to access www.google.com.
(5) Dial Backup will be triggered and WAN3 is up, but traffic goes out via traffic
redirect interface to ZyWALL_B.
23. [BUG FIX] SPR ID: 080122128
Symptom: Some action in CF is wrong
Condition:
(1) CF/General, disable Unrated Web Pages & When Content Filter Server Is
Unavailable
(2) Insert a policy, enable external DB, and choose a Category
(3) Flush cache
Seitenansicht 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare