ZyXEL Communications X6004 Betriebsanweisung PDF herunterladen (Seite 4)

Document Conventions

X6004 CLI Reference Guide

Document Conventions

Warnings and Notes

These are how warnings and notes are shown in this CLI Reference Guide.

1 Warnings tell you about things that could harm you or your device. See your

User’s Guide for product specific warnings.

" Notes tell you other important information (for example, other things you may

need to configure or helpful tips) or recommendations.

Syntax Conventions

This manual follows these general conventions:

• ZyXEL’s X6004 may be referred to as the “X6004”, the “device”, the “system” or the

“product” in this Reference Guide.

• Units of measurement may denote the “metric” value or the “scientific” value. For

example, “k” for kilo may denote “1000” or “1024”, “M” for mega may denote “1000000”

or “1048576” and so on.

Command descriptions follow these conventions:

• Commands are in

courier new font.

• Required input values are in angle brackets <>; for example,

ping <ip> means that you

must specify an IP address for this command.

• Optional fields are in square brackets []; for instance diag pbx show hunts

[mid], the mid parameter is optional.

The following is an example of a required field within an optional field: diag show

uptime [mid <mid>], the mid field is optional. However, if you use mid, then you

must provide the machine id information (mid).

•The | (bar) symbol means “or”.

• italic terms represent user-defined input values; for example, in system admin

show <username>, username can be replaced by the administrator’s name.

• A key stroke is denoted by square brackets and uppercase text, for example, [ENTER]

means the “Enter” or “Return” key on your keyboard.

• <cr> means press the [ENTER] key.

• An arrow (-->) indicates that this line is a continuation of the previous line.

1 2 3 4 5 6 7 8 9 ... 117 118

Keine Kommentare

ZyXEL Communications X6004 Betriebsanweisung Seite 4