ZyXEL Communications P8701T Betriebsanweisung PDF herunterladen (Seite 224)

Chapter 23 Troubleshooting

Basic Home Station VDSL2 P8701T User’s Guide

224

5 If the problem continues, contact the vendor.

23.2 VDSL Router Access and Login

I forgot the IP address for the VDSL Router.

1 The default LAN IP address is 192.168.1.1.

2 If you changed the IP address and have forgotten it, you might get the IP address of the VDSL

Router by looking up the IP address of the default gateway for your computer. To do this in most

Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the

Default Gateway might be the IP address of the VDSL Router (it depends on the network), so

enter this IP address in your Internet browser.

3 If this does not work, you have to reset the device to its factory defaults. See Section 1.5 on page

15.

I forgot the password.

1 See the back sticker for the default admin password.

2 If this does not work, you have to reset the device to its factory defaults. See Section 1.5 on page

15.

I cannot see or access the Login screen in the web configurator.

1 Make sure you are using the correct IP address.

• The default IP address is 192.168.1.1.

• If you changed the IP address (Section 5.2 on page 104), use the new IP address.

• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I

forgot the IP address for the VDSL Router.

2 Check the hardware connections, and make sure the LEDs are behaving as expected. See Section

1.4 on page 13.

3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java

enabled. See Appendix C on page 163.

4 If it is possible to log in from another interface, check the service control settings for HTTP and

HTTPS (Maintenance > Remote MGMT).

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 239 240

Keine Kommentare

ZyXEL Communications P8701T Betriebsanweisung Seite 224