ZyXEL Communications NWA-3100 Betriebsanweisung PDF herunterladen (Seite 11)

ENGLISH

The device is now ready to connect to your wired network. You can do this now, or once

you have installed the hardware.

V If the wireless clients cannot access the wired network, verify that the IP

address and the subnet mask of the NWA-3100 and the computers on the

network are in the same range. If the ETHN LED is off, check the cables

between the NWA-3100 and your computer or hub.

4 Install the Hardware

4.1 Attaching Antennas

" When facing the front of the NWA-3100, the right antenna (main antenna)

transmits and receives; the left antenna only receives.

10 Change the wireless settings in the wireless stations to match those of the NWA-

3100. Refer to your wireless adapter’s documentation.

" If you change the NWA-3100’s IP address, you must use the new IP

address when you next access the web configurator.

1 Screw the antennas clockwise onto the

antenna connectors on the sides of your

NWA-3100. The antennas should be

perpendicular to the ground and parallel

to each other.

Make sure the antennas are securely

screwed onto the antenna connectors.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 120 121

Keine Kommentare

ZyXEL Communications NWA-3100 Betriebsanweisung Seite 11