ZyXEL Communications NSA-2400 Betriebsanweisung PDF herunterladen (Seite 121)

NSA-2400 User’s Guide

121 Appendix C Setting up Your Computer’s IP Address

Figure 63 Red Hat 9.0: KDE: Network Configuration: Activate

7 After the network card restart process is complete, make sure the Status is Active in the

Network Configuration screen.

Using Configuration Files

Follow the steps below to edit the network configuration files and set your computer IP

address.

1 Assuming that you have only one network card on the computer, locate the

ifconfig-

eth0

configuration file (where eth0 is the name of the Ethernet card). Open the

configuration file with any plain text editor.

• If you have a dynamic IP address, enter

dhcp in the BOOTPROTO= field. The

following figure shows an example.

Figure 64 Red Hat 9.0: Dynamic IP Address Setting in ifconfig-eth0

• If you have a static IP address, enter static in the BOOTPROTO= field. Type

IPADDR= followed by the IP address (in dotted decimal notation) and type

NETMASK= followed by the subnet mask. The following example shows an example

where the static IP address is 192.168.1.10 and the subnet mask is 255.255.255.0.

DEVICE=eth0

ONBOOT=yes

BOOTPROTO=dhcp

USERCTL=no

PEERDNS=yes

TYPE=Ethernet

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 159 160

Keine Kommentare

ZyXEL Communications NSA-2400 Betriebsanweisung Seite 121