ZyXEL Communications Omni 56K USB Lite Bedienungsanleitung PDF herunterladen (Seite 49)

If the form of communication is of Type 3: Situation 3, enter the telephone number as shown

in the figure below (not forgetting the extension number attributed to the O2LA central

telephone line).

Tip:

Each comma induces a time delay of 1 second.

Enter the number of comma’s based on the time delay required.

Click the Dial button for starting Communications.

Warning: The number is dialed according to the configured mode “Tone” or “Pulse”. The

configuration modes are set in the Global system parameters -> Communication tab.

When communication with the O2LA is established, the following message screen will

appear.

Note: Due to traffic in telephone lines & EPBX connection might not establish, please try again.

Click Disconnect button to disconnect the Modem connection.

Fingerprint readers

With this Menu the Fingerprint readers connected in the network are configured.

PRO Lite 1.0 Manual

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 66 67

Keine Kommentare

ZyXEL Communications Omni 56K USB Lite Bedienungsanleitung Seite 49