ZyXEL Communications G-570U Betriebsanweisung PDF herunterladen (Seite 68)

ZyXEL G-570U User’s Guide

68 Chapter 6 Wireless Screens

6.3.4 AP+Repeater Mode

Select AP+Repeater as the Operation Mode to have the device act as an access point and a

wireless bridge.

Wireless Mode Select 802.11a only to allow only IEEE 802.11a compliant WLAN devices to

associate with the device.

Select 802.11b only to allow only IEEE 802.11b compliant WLAN devices to

associate with the device.

Select 802.11g only to allow only IEEE 802.11g compliant WLAN devices to

associate with the device.

Select Auto (11g/11b) to allow either IEEE 802.11b or IEEE 802.11g compliant

WLAN devices to associate with the device. The transmission rate of your device

might be reduced.

Local MAC

Address

This is the MAC address of the device.

Remote MAC

Address 1~4

Type the MAC address of the peer device in a valid MAC address format; six

hexadecimal character pairs (for example, 12:34:56:78:9a:bc).

Advanced Settings

Radio Enable Turn on the wireless adapter to allow wireless communications between the device

and other wireless devices. Turn off the wireless adapter to stop wireless

communications between the device and other wireless devices.

Data Rate

Management

Use this field to select a maximum data rate for the wireless connection(s). Please

note that this is a total rate to be shared by all of the device’s wireless connections.

Preamble Type Preamble is used to signal that data is coming to the receiver.

Short preamble increases performance as less time sending preamble means

more time for sending data. All IEEE 802.11b compliant wireless adapters support

long preamble, but not all support short preamble.

Select Long preamble if you are unsure what preamble mode the wireless

adapters support, and to provide more reliable communications in busy wireless

networks.

Select Dynamic to have the device automatically use short preamble when all

wireless clients support it, otherwise the device uses long preamble.

Note: The device and the wireless stations MUST use the same

preamble mode in order to communicate.

RTS/CTS

Threshold

Enter a value between 0 and 2346. The default is 2346.

Fragmentation Enter a value between 256 and 2346. The default is 2346. It is the maximum data

fragment size that can be sent.

Apply Click Apply to save your changes back to the device.

Reset Click Reset to begin configuring this screen afresh.

Table 13 Wireless Settings: Bridge (continued)

LABEL DESCRIPTION

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 161 162

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications G-570U Betriebsanweisung Seite 68

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für WLAN-Zugangspunkte ZyXEL Communications G-570U