ZyXEL Communications SMG-700 Betriebsanweisung PDF herunterladen (Seite 66)

Chapter 7 Maintenance

P-974H/HW Series User’s Guide

The following table describes the labels in this screen.

7.4 Band

Use the Band screen to configure frequency bands for faster downstream channel

scanning for Internet access.

Click Maintenance > Band to display the configuration screen.

Figure 24 Maintenance: Band

Table 24 Maintenance: Diagnostics (Traceroute)

LABEL DESCRIPTION

Select Utility Select either Ping or Traceroute from the Select Utility menu

to choose a test. The screen changes accordingly.

Traceroute Test

Parameters

Target Type the IP address or domain name (such as www.example.com) of a

device that you want to traceroute in order to test a connection.

Max Hops Specify the maximum number of hops the traceroute takes before the

process ends. A hop is connection from one router or intermediate

device to another on a network. The more hops there are, the longer it

takes for data to reach its destination.

Data Size Specify the number of data packet bytes the ZyXEL Device sends on the

traceroute. The default is 40 bytes (32 bytes of data plus 8 bytes for the

header). If you need to determine the Maximum Transmission Unit

(MTU) size TCP/IP connection, change this setting. Otherwise leave it as

the default.

Base Port This field is not enabled as of this writing.

Resolve Host Select On to resolved all IP addresses returned by the traceroute to

their domain names.

Start Test Click Start Test to begin the ping test.

Abort Test Click Abort Test to stop the ping test.

Clear Results Click Clear Results to clear the Results text box.

Results This read-only text box displays the ping test results.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 115 116

Keine Kommentare

ZyXEL Communications SMG-700 Betriebsanweisung Seite 66