Zyxel-communications U-336SA Bedienungsanleitung PDF herunterladen (Seite 35)

Basic Modem Operation 21

Storing Phone Numbers

The AT command to store a phone number is in the format AT&Zs=n.

The ‘s’ is a number from 0 to 49 that represents the location in memory

that the phone number is to be stored, and the ‘n’ is the phone number

itself.

Example: To store the number ‘1-714-555-1212’ in memory location

‘2’, type:

AT&Z2=17145551212<Enter>

You can store up to 50 telephone numbers.

Dialing Stored Phone Numbers

The AT command syntax used to dial a stored number is ATDS=n.

The ‘n’ is the memory location of the stored number you want to dial.

ONOTE: AS A GENERAL RULE, WHEN A LETTER IN AN AT COMMAND DEFINITION IS

SHOWN IN ITALIC TYPE, THE LETTER IS NOT TO BE ENTERED AS PART OF THE

COMMAND, BUT RATHER IS REPRESENTATIVE OF A NUMBER OR STRING

EXPECTED AS INPUT. FOR EXAMPLE: THE LETTER ‘S’ IN THE ATDS=N

COMMAND IS ACTUALLY TYPED, UNLIKE THE ‘S’ IN THE AT&ZS=N COMMAND

WHICH REPRESENTS A NUMBER.

Saving Settings and User Profiles

There are some cases where you may wish to save the settings you

have made as the default settings that are recalled when your modem is

powered up. The AT&WZ command selects the current settings as the

power-on profile.

There are four profiles that can be changed by the user, and one factory

default profile. The following table lists the syntax for the commands

involved in storing, recalling, and viewing profile settings:

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 160 161

Keine Kommentare

Zyxel-communications U-336SA Bedienungsanleitung Seite 35