Zyxel-communications U-336SA Bedienungsanleitung PDF herunterladen (Seite 88)

74 Fax Operation

Response Value

Function and Description

+FNSF:"HEX string" Report the non-standard facilities frame

response.

+FNSS:"HEX string" Report the non-standard setup frame

response.

+FPOLL Remote polling indication.

+FPTS:n Receive page transfer status response;

refer to +FPTS=n command.

+FTSI:"string" Report remote ID response TSI.

+FVOICE Transition to Voice response.

Class 2 Flow Control

Flow control is necessary to match the DTE-DCE data rate to the line

signaling rate while transmitting or receiving Group 3 (T.4) data. In

Class 2 fax mode, both hardware (RTS/CTS) and software

(XON/XOFF) flow control are enabled.

Class 2.0 Command Set

Command Syntax Description

+<command>=<value> Execute a command or set a

parameter.

+<command>=? Read permissible settings.

+<command>? Read the current setting.

Supported Commands

Command Value Description

+FAA=n Auto-answer mode parameter:

n=0 DCE answers as set by +FCLASS.

n=1 DCE answers and auto-determines call

type.

+FBO=n Phase C data bit order:

n=0 Select direct bit order.

n=1 Select reversed bit order in receiving

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 160 161

Keine Kommentare

Zyxel-communications U-336SA Bedienungsanleitung Seite 88