Zyxel-communications NBG334W Bedienungsanleitung PDF herunterladen (Seite 217)

Chapter 23 Sys Op Mode

NBG334W User’s Guide

217

Figure 130 Maintenance > Sys Op Mode > General: AP

•In AP Mode all Ethernet ports have the same IP address.

• All ports on the rear panel of the device are LAN ports, including the port labeled WAN.

There is no WAN port.

• The DHCP server on your device is disabled. In AP mode there must be a device with a

DHCP server on your network such as a router or gateway which can allocate IP

addresses.

The IP address of the device on the local network is set to 192.168.1.1.

The following table describes the labels in the General screen.

Table 99 Maintenance > Sys OP Mode > General

" If you select the incorrect System Operation Mode you cannot connect to the

Internet.

LABEL DESCRIPTION

System Operation Mode

Router Select Router if your device routes traffic between a local network and another

network such as the Internet. This mode offers services such as a firewall or

bandwidth management.

Access Point Select Access Point if your device bridges traffic between clients on the same

network.

Apply Click Apply to save your settings.

Reset Click Reset to return your settings to the default (Router)

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 295 296

Keine Kommentare

Zyxel-communications NBG334W Bedienungsanleitung Seite 217