Zyxel-communications Omni 56K II Bedienungsanleitung PDF herunterladen (Seite 79)

Omni 56K II and Omni 56K Plus II User’s Guide

Command Sets 5-33

COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION REF.

7 128 80 Ignore calling tone, not to be used as fax detection.

bit dec hex Bit-mapped register.

1 2 2 Enables throughput averaging. 2

2 4 4 A CND message forces on even if ATQ2 is set.

3 8 8 This disables the escape sequence code in answer

mode.

4 16 10 This disables the V.17 14,400 Fax in calling mode and

no effect on answering mode.

6 64 40 This disables the 'RINGING' result code. Xn

S42=

7 128 80 The DCD is forced on but pulses off for 0.5 second at

carrier loss.

&C0

bit dec hex Bit-mapped register. +008

6 64 40 Enable a 1.5 second pause between off-hook and

modem answering.

S43=

7 128 80 The modem hangs-up if the line condition does not

permit the modem to run at the highest speed set by

'&Nn' command.

bit dec hex Bit-mapped register. +000

3 8 8 ATDSn initiates auto-dial of the stored numbers

consecutively until a connection is made (cyclic dial).

DSn

4 16 10 DSR follows DTR (see also S41.5). &S1

S44=

6 64 40 When selected with ‘&B0’, DTE speed is fixed at

38400 when the link speed is above 9600. DTE speed

is fixed at 9600 if the link speed is 7200. If it is below

7200, the DTE speed follows link speed. When

selected with &B1, DTE speed is fixed at the current

rate when an ARQ connection is made. When a non-

ARQ connection is made, DTE speed follows the link

speed (See also S18).

&Bn

S45= dec

0-255

hex

0-FF

The delay during which the CND silence detection is

disabled, in 20 ms units (see also S46).

+100

S46= dec hex The CND silence detection interval. +028

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Zyxel-communications Omni 56K II Bedienungsanleitung Seite 79

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Zyxel-communications Omni 56K II