Zyxel-communications P-2602R-DxA Series Bedienungsanleitung PDF herunterladen (Seite 117)

P-2602R/RL-DxA Series User’s Guide

Chapter 9 Network Address Translation (NAT) Screens 117

The following table describes the fields in this screen.

9.5.2 SIP ALG

Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG allows

SIP calls to pass through NAT by examining and translating IP addresses embedded in the

data stream. When the ZyXEL Device registers with the SIP register server, the SIP ALG

translates the ZyXEL Device’s private IP address inside the SIP data stream to a public IP

address.

Use this screen to enable and disable the SIP (VoIP) ALG in the ZyXEL Device. To access

this screen, click Network > NAT > ALG.

Table 34 Port Forwarding Rule Setup

LABEL DESCRIPTION

Active Click this check box to enable the rule.

Service Name Enter a name to identify this port-forwarding rule.

Start Port Enter a port number in this field.

To forward only one port, enter the port number again in the End Port field.

To forward a series of ports, enter the start port number here and the end port

number in the End Port field.

End Port Enter a port number in this field.

To forward only one port, enter the port number again in the Start Port field above

and then enter it again in this field.

To forward a series of ports, enter the last port number in a series that begins with

the port number in the Start Port field above.

Server IP

Address

Enter the inside IP address of the server here.

Back Click Back to return to the previous screen.

Apply Click Apply to save your changes back to the ZyXEL Device.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 347 348

Keine Kommentare

Zyxel-communications P-2602R-DxA Series Bedienungsanleitung Seite 117