Zyxel-communications WPA-1000 Bedienungsanleitung PDF herunterladen (Seite 26)

Chapter 2 WPA-1000 Hardware

WPA-1000 User’s Guide

The following table describes the rear panel labels.

2.2 Front Panel LEDs

Figure 5 Front Panel LEDs

The table below describes the labels in the screen.

Table 1 Rear Panel Connections

VGA Use the gray VGA cable from the package to connect your WPA-1000 to a projector.

RESET To reset the WPA-1000 to its default settings, use a pointed device such as a pen to

press the RESET button in for more than 30 seconds. While pressing RESET, turn your

device off and then on again.

Default settings include:

• Password of conference control host and administrator: 1234

• SSID: ZyXEL

• Server IP: 192.168.1.10

• WEP: disabled

• Gatekeeper: All Block

• Resolution: 1024 by 768

• Color depth: 32bit

• Refresh rate: 60Hz

LAN Connect your computer to the LAN port using the red LAN cable that came with the

package.

Table 2 Front Panel LEDs

LED COLOR STATUS DESCRIPTION

STATUS Green On The WPA-1000 is ready to project.

Orange On The device is starting.

Off The device is not starting.

PLAY

(N/A)

Green Blinking The device is projecting.

Off The device is not projecting.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 159 160

Keine Kommentare

Zyxel-communications WPA-1000 Bedienungsanleitung Seite 26