ZyXEL Communications 10 Bedienungsanleitung PDF herunterladen (Seite 63)

ZyWALL SSL 10 Support Notes

5) On peer VPN gateway, use the public WAN IP address of NAT Router as the “Remote

Gateway Address” of Gateway Policy rule.

The ID must be consistent no matter if IP/DNS/EMAIL is used. So long as if the ID Type

and content are consistent on both VP entities.

Configure Port Forwarding rule for SSL VPN traffic on the ZyWALL A

1) Go to the GUI menu ADVANCED > NAT > Port Forwarding, add one rule to

forward port 443 traffic to the ZyWALL SSL 10 (192.168.3.2)

2). Go to the GUI > ADVANCED > REMOTE MGMT > WWW, change the ZyWALL

UTM’s HTTPS management port number from port 443 to another port number (ex. 10443).

This is to make sure all HTTPS traffic via port 443 will be forwarded to ZyWALL SSL 10.

But when IT staff needs to access the ZyWALL UTM by HTTPS, they can use

https://IP_address:10443 (which the IP_address could be the ZyWALL’s LAN or DMZ or

WAN IP address depending on server access setting).

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 101 102

Keine Kommentare

ZyXEL Communications 10 Bedienungsanleitung Seite 63