ZyXEL Communications P-2302HWUDL-P1 Betriebsanweisung PDF herunterladen (Seite 202)

Chapter 16 Static Route

P-2302HWUDL-P1 Series User’s Guide

202

" The first static route is the default route and cannot be modified or deleted.

Figure 120 Management > Static Route > IP Static Route

Each field is described in the following table.

16.2.2 IP Static Route Edit Screen

Use this screen to edit a static route in the ZyXEL Device. To access this screen, click an Edit

icon in Management > Static Route > IP Static Route.

Table 90 Management > Static Route > IP Static Route

LABEL DESCRIPTION

# This field is a sequential value, and it is not associated with a specific rule. The

sequence is important, however. The ZyXEL Device checks each rule in order,

and it only follows the first one that applies.

Name

This field displays the name that describes the static route.

Active This field shows whether this static route is active (Yes) or not (No).

Destination This field displays the destination IP address(es) that this static route affects.

Gateway

This field displays the IP address of the gateway to which the ZyXEL Device

should send packets for the specified Destination. The gateway is a router or a

switch on the same network segment as the device's LAN or WAN port. The

gateway helps forward packets to their destinations.

Modify

Use this field to edit or erase the static route.

Click the Edit icon to open the IP Static Route Edit screen for this static route.

Click the Remove icon to erase this static route.

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 367 368

Keine Kommentare

ZyXEL Communications P-2302HWUDL-P1 Betriebsanweisung Seite 202