ZyXEL Communications VSG1432 Betriebsanweisung Seite 341

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 408
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 340
Appendix A Setting up Your Computer’s IP Address
VSG1432-B101 Series User’s Guide
341
6 Click the Activate button to apply the changes. The following screen displays.
Click Yes to save the changes in all screens.
Figure 176 Red Hat 9.0: KDE: Network Configuration: Activate
7 After the network card restart process is complete, make sure the Status is
Active in the Network Configuration screen.
Using Configuration Files
Follow the steps below to edit the network configuration files and set your
computer IP address.
1 Assuming that you have only one network card on the computer, locate the
ifconfig-eth0 configuration file (where eth0 is the name of the Ethernet card).
Open the configuration file with any plain text editor.
If you have a dynamic IP address, enter dhcp in the BOOTPROTO= field. The
following figure shows an example.
Figure 177 Red Hat 9.0: Dynamic IP Address Setting in ifconfig-eth0
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
USERCTL=no
PEERDNS=yes
TYPE=Ethernet
Seitenansicht 340
1 2 ... 336 337 338 339 340 341 342 343 344 345 346 ... 407 408

Kommentare zu diesen Handbüchern

Keine Kommentare