
Chapter 4 Tutorials
VSG1432-B101 Series User’s Guide
44
2 In this example, the DSL connection has the following information.
3 Select the Active check box. Enter the General and ATM PVC Configuration
settings as provided above.
Set the Type to ADSL.
Choose the Encapsulation specified by your DSL service provider. For this
example, the service provider requires a username and password to establish
Internet connection. Therefore, select PPPoE as the WAN encapsulation type.
4 Enter the account information provided to you by your DSL service provider.
5 Configure this rule as your default Internet connection by selecting the
Apply as
Default Gateway check box
. Then select DNS as Static and enter the DNS server
addresses provided to you, such as 192.168.5.2
(DNS server1)/192.168.5.1
(DNS server2).
General
Connection Name MyDSLConnection
Type ADSL
Connection Mode Routing
Encapsulation PPPoE
ATM PVC Configuration
VPI/VCI 36/48
Encapsulation Mode LLC/SNAP-Bridging
Service Category UBR without PCR
Account Information
PPP User Name 1234@DSL-Ex.com
PPP Password ABCDEF!
PPPoE Service Name My DSL
Static IP Address 192.168.1.32
Others PPPoE Passthrough: Disabled
NAT: Enabled
IGMP Multicast Proxy: Enabled
Apply as Default Gateway: Enabled
Kommentare zu diesen Handbüchern