ZyXEL Communications NBG334W Betriebsanweisung Seite 80

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 189
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 79
Chapter 5 AP Mode
NWD2105 User’s Guide
80
5.4.1 Security Settings
When you configure the NWD2105 to act as an AP and wireless security is
activated, the Configuration screen varies according to the encryption method
used by your network.
5.4.1.1 Disable
This option indicates that no security services are enabled. Anyone within range of
your AP can connect to it without having to enter a pre-shared key.
Note: When security settings are disabled in AP Mode and if you have a shared
Internet connection via the Bridge feature (see page 80) or any shared folders
on the computer that is hosting the AP, they will be available to anyone who is
connected.
Output
Power
Set this field if you need to conserve power consumption (especially for
notebook computers). This control changes the strength of the
NWD2105’s antenna gain or transmission power. Antenna gain, listed
here as a percentage, is the increase in coverage. Higher antenna gain
improves the range of the signal for better communications.
100% - Sets the antenna gain at maximum output power. This has
the highest level of power consumption. If you are using the
NWD2105 on a notebook computer running on battery power, then
using this power setting will drain the battery the fastest.
75% - Sets the antenna gain to medium-high output power. This is
a decent comprimise between signal strength and power consump-
tion.
50% - Sets the antenna gain to medium output power. The range is
reduced but the power consumption is much less.
25% - Sets the antenna gain to low output power. This significantly
reduces the transmission range but save considerable power.
•Lowest - Sets the antenna gain to minimal output power. You are
trading decent transmission range for significant power savings.
Bridge Select the check box and an Ethernet adapter (network interface card
(NIC)) on your computer from the drop-down list box. This allows you
to connect your wireless network to the specified wired network.
Note: This feature is not supported in Windows 2000.
Security type Select a security type for your AP. Options are DISABLE, WEP, WPA-
PSK and WPA2-PSK.
Save Click to save the changes.
Cancel Click to discard the changes.
Table 22 Configuration (continued)
LABEL DESCRIPTION
Seitenansicht 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 188 189

Kommentare zu diesen Handbüchern

Keine Kommentare