ZyXEL Communications Prestige 642M series Betriebsanweisung PDF herunterladen (Seite 108)

Prestige 642 ADSL Internet Access Router

2-1

Hardware Installation & Setup

Chapter 2

Hardware Installation & Initial Setup

This chapter describes the physical features of the Prestige and how to make the cable

connections

2.1 Front Panel LEDs OF P642

The LED indicators on the front panel indicate the operational status of the Prestige 642. The table below

the diagram describes the LED functions:

Figure 2-1 Prestige 642 Front Panel.

Table 2-1 Front Panel LED Description

PWR

The PWR (power) LED is on when power is applied to the Prestige.

SYS

A steady on SYS (system) LED indicates the Prestige is on and functioning properly

while an off SYS LED indicates the system is not ready or a malfunction. The

system is rebooting when the SYS LED is blinking.

LAN 10M

A steady light indicates a 10Mb Ethernet connection. The LED will blink when data

is being sent/received.

LAN 100M

A steady light indicates a 100Mb Ethernet connection. The LED will blink when data

is being sent/received.

ADSL

The ADSL LED is on when the Prestige is connected successfully to a DSLAM. The

LED blinks when data is being sent/received. The LED is off when the link is down.

2.2 Prestige 642 Rear Panel and Connections

The following figure shows the rear panel connectors of your Prestige.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 154 155

Keine Kommentare

ZyXEL Communications Prestige 642M series Betriebsanweisung Seite 108