ZyXEL Communications ZYWALL 5 - V4.04 Betriebsanweisung PDF herunterladen (Seite 143)

ZyXEL Confidential

404XD3C0.docx

143/181

Symptom: The CI command ”ip nat service irc” may display strange Enable state.

Condition:

(1) Execute ”ip nat service irc he_is_good”.

(2) Execute ”ip nat service irc 0”.

(3) Execute ”ip nat service irc he_is_bad”.

After Step 3, you will see that a strange Enable state, e.g., ”IRC enable = 12”.

9. [BUG FIX]

Symptom: The eWC>Firewall>Rule Summary>EDIT RULE page might be

corrupted.

Condition:

(1) Go to eWC>Firewall>Rule Summary.

(2) Add or Edit a firewall rule.

(3) Try to delete a Source Address (or Destination Address) without first selecting an

address.

(4) Or try to delete a Service without first selecting a service.

(5) With 3 or 4, you will see an error message on the status bar.

(6) Click on any button of this page, and then you will see that the values of some fields

on this page are lost. Also you won't be able to escape this page by clicking on the

Cancel button.

10. [ENHANCEMENT] Add SIP protocol in service list in firewall rule edit page.

11. [BUG FIX]

Symptom: In SMT 15.1 address mapping rule error message not correct.

Condition:

(1) In SMT 15.1, configure NAT address mapping many to many overloads(or many

one to one).

(2) Configure local address from 0.0.0.0 to 255.255.255.255.

(3) Configure global address from 0.0.0.0 to 255.255.255.255.

(4) Save the configuration =>error message show “The end IP address must be great

than the start IP address “ not correct.

12 [BUG FIX]

Symptom: Configure WAN page, and WAN priority will become 1.

Condition:

(1) In "eWC->WAN->General", set WAN1 priority to 5.

(2) In "eWC->WAN->WAN"., set encapsulation type to PPTP or PPPoE.

(3) Go to "eWC->WAN->General", WAN's priority will become 1.

13 [ENHANCEMENT] Give a warning message when user configure FTP/SIP/H.323

filter on BWM but FTP/SIP/H.323 alg is not enabled.

GUI : Save the filter and show the warning message. Warning: This is a SIP(FTP,

H.323) filter, you have to enable SIP(FTP, H.323) ALG by CI command "ip alg

enable".

CI command : After running "bm config save", the router will save the configuration

and check all filters in all interface. Then show a list of filters which are conflicted.

14 [ENHANCEMENT] NAT address mapping need prevent user configure local IP

range and global IP range overlap.

15 [BUG FIX]

Symptom: SIP WiFi-Phone's voice communication failed.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 180 181

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications ZYWALL 5 - V4.04 Betriebsanweisung Seite 143

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications ZYWALL 5 - V4.04