ZyXEL Communications ZYWALL 70 - V4.03 Technical Information PDF herunterladen (Seite 7)

[MISC]

1. The DMZ TxPkts counter increment at about 1 pkt/min even without any Ethernet

cables ever connected.

2. In eWC->Statistics, Tx data for Dial Backup is not correct.

3. ZyWALL does not support WAN 1/WAN 2 on the same sub-net. (For Multiple WAN

products)

4. The function of new CI command ”sys rn pingDrop” doesn’t work. SPR ID:

070503103

5. Traffic is blocking. SPR ID: 070404256

[CNM]

1. DES/3DES encryption key doesn’t unique.

2. [Symptom] Device will crash, when Vantage set Dial Back Fixed IP in the same

subnet as WAN to device.

[Condition]

(1). Let device register to Vantage.

(2). Vantage set Dial Backup to enable.

(3). Vantage set Dial Backup Fixed IP in the same subnet as WAN to device.

(4). Device will crash after writing above settings.

3. Vantage will set incorrect root password to device when hash root password flag

enable via ci command: “sys pwdHash on”.

4. Vantage server can’t check IP conflict with WAN on the following pages. LAN,

WLAN, DMZ, Static Route and Dial Backup.

5. Agent can’t response inquire success packet to Vantage when change port roles.

6. Only ZW70 with Model ID 0x1F55 supported. (Server release known issues).

7. Server remove online device from top-tree, but dose not sent "cnm active 0"

message to device.

8. Vantage server won’t retry to trigger TA inform again if SGMP triggered fail.

Features:

Modifications in V4.03(WM.1) | 01/31/2008

Modify for formal release.

Modifications in V4.03(WM.1)b1 | 01/17/2008

1. [ENHANCEMENT] SPR ID: 070724576

Provide a ci command "sys tos allow_FinPshAck [on|off]" to allow or block packet

with FIN, PSH, and ACK flag. Default is off, that is to say, blocking packet with FIN,

PSH, and ACK flag.

2. [ENHANCEMENT]

Provide a CI command "ip arp reqUpadteTable [on/off]" to enable/disable that the

device would use receiving ARP packet to update ARP table. The default value is

off and the value will return to off when the device re-start.

3. [ENHANCEMENT]

1 2 3 4 5 6 7 8 9 10 11 12 ... 81 82

Keine Kommentare

ZyXEL Communications ZYWALL 70 - V4.03 Technical Information Seite 7