ZyXEL Communications P-2024 Betriebsanweisung PDF herunterladen (Seite 32)

P-2024 Support Notes

Is it possible to access a server running behind SUA from the outside Internet? If possible,

how?

Yes, it is possible because P-2024 delivers the packet to the local server by looking up to a SUA server table.

Therefore, to make a local server accessible to the outside users, the port number and the inside IP address of

the server must be configured in SMT Menu 15 - SUA Server Setup.

What DHCP capability does the P-2024 support?

The P-2024 supports DHCP client on the WAN por. The P-2024's DHCP client allows it to get a public WAN

IP address from the ISP automatically if your ISP uses DHCP as a method to assign IP addresses.

How do I use the reset button? And which parameter will be reset by the reset button?

Use a sharp pointed object to press the reset button located near the power connector. Press and hold down the

button for about five seconds to reset the device. All device settings, including the login password and IP

address, will be reset to the factory defaults.

The default IP address is 192.168.5.1 and the default login password is 1234.

What network interface does the new P-2024 series support?

The new P-2024 series comes with an auto MDX/MDIX 10/100M Ethernet LAN port to connect to computer(s)

or switch(es) on the LAN and one 10/100M Ethernet port to connect to the external cable/DSL modem on the

WAN.

Does the P-2024 support TFTP?

Yes. In addition to the direct console port connection, the P-2024 supports firmware upload and configuration

file uploading/download using TFTP (Trivial File Transfer Protocol) over LAN.

Does the P-2024 support TFTP over WAN?

Although TFTP also works over the WAN, it is not recommended because of potential data corruption error

while transferring files to the P-2024.

How can I upload data to outside Internet over the one-way cable?

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Keine Kommentare

ZyXEL Communications P-2024 Betriebsanweisung Seite 32