ZyXEL Communications STB-2101H Betriebsanweisung PDF herunterladen (Seite 5)

BeeSmart LITE Documentation

Recommended technical knowledge and competences for successful BeeSmart LITE installation:

good Linux knowledge

good IP network knowledge

experiences in IPTV field

experiences with VoD systems and STB devices

experiences with SW products and applications

In case of issues, please check the FAQ section and BeeSmart LITE forum or send the question to the BeeSmart LITE forum.

How to check that OS installation was completed successfully?

First of all, please make sure that you use the provided ISO image with the included kick start file for the OS installation. Just after OS installation

start, you should see screen with big BeeSmart logo, where you need to input »beesmart«. If you don't see that screen or you don't input

»beesmart«, OS will not be installed using the required kick start and OS parameters will not be correct.

After OS installation is finished, you can check the following:

Check the partitions of the system. There should be only the system partition prepared

There should be at least 25 GB of free space on the system partition

Can I use existing, already installed Centos OS or install it manually without using the BeeSmart LITE installation?

In theory yes, but it has to be installed according the BeeSmart requirements. You can check the kick start file from the BeeSmart LITE package

and configure all OS parameters defined in the kick start to the same values. If you fail to do so, BeeSmart LITE won't function properly. However,

we still strongly recommend to use the automatic installation for the OS installation to avoid potential issues.

How to check that BeeSmart LITE installation is completed successfully?

First of all, you should see the message: »Installation successfully completed, please reboot the server«. Make sure that you reboot the server

and wait for about 5 minutes that all the processes are up. After that you can check that BeeSmart LITE Admin page (

) can be opened. For a first test please test it using the Firefox web browser from the BeeSmart LITE serverhttp://IP_address:85/omniplay/admin

to exclude the potential problems with the IP network. If yes, it means that installation was successful. If not use the bellow troubleshooting

procedure:

Check if the OS installation was completed correctly

Check if the Apache server was installed correctly and that service is up and running

Check if the Tomcat was installed correctly and that service is up and running

Check if the Jboss was installed correctly and that service is up and running

Check if the Oracle DB was installed correctly and that service is up and running

Once you figure out which part of the installation is missing or not working, please check the BeeSmart Troubleshooting Guide for further

assistance. If you can't find useful hints there, you can post an issue on the BeeSmart LITE forum or check the forum to find answers on the

similar issues. It might also be worth trying all the installation steps, including OS installation, once more from the start.

Is it possible to install BeeSmart LITE on the virtual server e.g. VMware or Virtual Box?

Yes, in theory it is possible. However, using the virtual server for the BeeSmart LITE installation might cause several failures due to some

unrecognized HW components or different disk naming etc. It is hard to assure that automatic OS installation will cover all the different possible

configurations. We have tested the BeeSmart LITE installation with the VMWare player and the Virtual Box, however this can't cover all the

possible scenarios.

Please check the BeeSmart Lite Installation Guide for some tips when using the virtual servers.

If you are using VMware or Virtual Box and you are facing some issues, usually deeper Linux knowledge is required to solve these issues.

Common mistakes are that disk is not recognized with the same names as it is defined in the automatic installation or that system partition is not

created or that it doesn't have enough space available for the installation of all other components. Once you successfully install OS on the virtual

server with the provided ISO, you shouldn't have any more problems with further installation.

If you are still facing issues with OS installation on the virtual server, please check the BeeSmart LITE forum if there are any similar issues

already answered. You can also post the issue description on the BeeSmart LITE forum.

Recommended option in case of such problems is that you use the standalone server installation instead of the virtual server.

OS installation stops unexpectedly? I tried several times but it is always the same?

1 2 3 4 5 6 7 8 9 10 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications STB-2101H Betriebsanweisung Seite 5

Kommentare zu diesen Handbüchern