ZyXEL Communications MAX218MW Betriebsanweisung PDF herunterladen (Seite 30)

Chapter 5 Tutorials

WRE2205 User’s Guide

2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and

utility in your notebook.

3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or

WPS button)

4 Log into WRE2205’s Web Configurator and navigate to the Network > Wireless LAN > WPS

Station screen.

5 In the WRE2205’s Web Configurator, select Registrar in Config Mode and then press Start PBC.

Note: Your WRE2205 has a WPS button located on its panel, as well as a Start PBC

button in the Web Configurator. Both buttons have exactly the same function; you

can use one or the other.

Note: It doesn’t matter which button is pressed first. You must press the second button

within two minutes of pressing the first one.

The WRE2205 sends the proper configuration settings to the wireless client. This may take up to

two minutes. Then the wireless client is able to communicate with the WRE2205 securely.

The following figure shows an example of how to set up wireless network and security by pressing a

button on both WRE2205 and wireless client (the NWD210N in this example).

Figure 17 Example WPS Process: PBC Method

Wireless Client

WRE2205

SECURITY INFO

COMMUNICATION

WITHIN 2 MINUTES

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 73 74

Keine Kommentare

ZyXEL Communications MAX218MW Betriebsanweisung Seite 30