ZyXEL Communications U-1496 series Bedienungsanleitung PDF herunterladen (Seite 45)

=32; V.17FAX 14400/12000/9600/7200,

V.29FAX 9600/7200,

V.27terFAX 4800/2400.

=34; ZyX 19200 19200

=35; ZyX 16800 16800

=36; ZyX 14400 14400

=37; ZyX 12000 12000

=38; ZyX 9600 9600

=39; ZyX 7200 7200

=42; CELL 14400 14400

=43; CELL 12000 12000

=44; CELL 9600 9600

=45; CELL 7200 7200T

=46; CELL 4800 4800T

=47; CELL 4800 4800C

=48; CELL 3600 3600C

=49; CELL 3600 2400C

Note: Not all models support all modes. Check the compatibility table for available modes.

S20 DTE speed, default=2

(Auto detected from AT command)

=0; 76.8 Kbps.

=1; 57.6 Kbps.

=2; 38.4 Kbps.

=3; 19.2 Kbps.

=4; 16.8 Kbps.

=5; 14.4 Kbps.

=6; 12.0 Kbps.

=7; 9.6 Kbps.

=8; 7.2 Kbps.

=9; 4.8 Kbps.

=10; 3.6 Kbps.

=11; 2.4 Kbps.

=12; 1.8 Kbps.

=13; 1.2 Kbps.

=14; 600 bps.

=15; 300 bps.

S21 Bit-mapped register, default =178

&Dn (7,6) =0; Modem ignores DTR signal, assumes DTR always ON.

=1; 108.1, DTR OFF-ON transition causes dial of the default

number. DTR OFF causes hang-up.

=2; 108.2, Data Terminal Ready, DTR OFF causes the modem to

hang up and return to command state.

=3; 108.2, DTR off causes the modem to hang up and reset the

modem to profile 0.

&Rn (5) =0; CTS follows RTS in synchronous mode. Response delay set in

S26.

=1; Ignore RTS (CTS always ON) in synchronous mode.

&Cn (4) =0; CD always ON.

=1; CD tracks presence of data carrier. (See also S38b3)

&Sn (3) =0; Modem forces DSR always ON.

=1; According to CCITT. (See also S44b4, S41b5)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 107 108

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications U-1496 series Bedienungsanleitung Seite 45

Kommentare zu diesen Handbüchern