
VES-1000 Series Ethernet Switch
9-2 System Maintenance 1
9.2.1 System Maintenance
Step 1. Enter 24 from the main menu to go to Menu 24 – System Maintenance.
Step 2. Enter 1 to open Menu 24.1 – System Status.
Step 3. Enter 1 again to open Menu 24.1.1 — System Maintenance — System Status.
Figure 9-3 Menu 24.1 – System Maintenance – System Status
Figure 9-3 shows the menu screen for the VES-1012 Ethernet switch. The same screen for the VES-1008A will
show Ports 1-10
The following table describes the fields present in Menu 24.1 – System Maintenance – Status.
Table 9-1 System Maintenance – Status Menu Fields
FIELD DESCRIPTION
Port This refers to the VDSL or Ethernet port number. The cursor (“>“) next to a port marks the
current selected port (see commands ahead).
Link This field shows whether the VDSL or Ethernet connection is down, the
upstream/downstream speeds of the VDSL connections and the speed/duplex mode of the
Ethernet connections.
If the configured upstream and downstream rates for port 1 were 18Mbps and 16Mbps
respectively (configured in SMT menu 6.1), then we can see from menu 24.1.1 that the
actual (upstream and downstream) rates attained for port 1 with rate adaption enabled were
9Mbps and 12Mbps respectively. Without rate adaption this link may not have established at
all or it would have established but with sporadic transmission.
State This field shows training state of the ports. The states are FWD (forwarding), which means
the link is functioning normally or STOP (the port is stopped to break a loop or duplicate
path).
TxPkts This field shows the number of transmitted packets on this port.
RxPkts This field shows the number of received packets on this port.
Errs This field shows the number of received errors on this port.
Menu 24.1 — System Maintenance — System Status
Port Link State TxPkts RxPkts Errs Tx(KB/s) Rx(KB/s) Up Time
> 1 9M/12M FWD 1636800 636352 4 473 10 7:46:10
2 18M/16M FWD 3023504 0 0 8 0 22:24:04
3 Down STOP 0 0 0 0 0 0:00:00
4 18M/16M FWD 3093495 55529 0 8 0 22:24:04
5 Down STOP 0 0 0 0 0 0:00:00
6 Down STOP 0 0 0 0 0 0:00:00
7 18M/16M FWD 3036539 26460 0 8 0 22:23:51
8 18M/16M FWD 3041121 16886 0 8 0 22:24:00
9 18M/16M FWD 3017116 0 0 8 0 22:24:03
10 18M/16M FWD 109882 0 0 8 0 0:55:56
11 12M/16M FWD 3029325 11669 0 6 0 22:24:02
12 18M/16M FWD 607588 30 0 6 0 5:20:06
13 100M/F FWD 1051300 10710950 1 11 508 72:07:19
14 100M/F FWD 246459 9990813 0 0 10 72:07:19
Press Command:
COMMANDS: a-Reset All b-Reset d-Drop i-UP j-Down p-Detail ESC-Exit
Kommentare zu diesen Handbüchern