ZyXEL Communications Ethernet switch Betriebsanweisung Seite 232

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 268
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 231
Dimension ES-4024 Ethernet Switch
35-14 Introduction to CLI
Table 35-2 Command Summary: sys sw
COMMAND DESCRIPTION
ingress set <port> <enable | disable>
Sets ingress check on a port.
get <port>
Gets ingress check state on a
port.
viewAll
Gets ingress check state on all
ports.
learn enable [port]
Enables address learning on the
port.
disable [port]
Disables address learning on the
port.
display [port]
Displays address learning status.
isolate disable
Disables port isolation.(All
connected)
port <port> <Port-List (in Hex)>
Sets the port-list which can
connect to the specific port.
enable
Enables port isolation.
mc set <addr> <port>...
Sets ports to a specific multicast
address
del <addr>
Deletes a specific multicast
address
get <addr>
Shows settings of the multicast
address
vlan status
Displays VLAN status
type <802.1q | port-based>
Sets VLAN mode
diffserv enable
Enables diffserv
disable
Disables diffserv
defdscp <DSCP (Hex)>
Sets the default DSCP of the
diffserv
portdefdscp <port> <on/off>
Sets the status of default DSCP
for this port <port>
mark <class idx> <DSCP (Hex)>
Applies class to diffserv
del <class idx>
Deletes diffserv class
disp
Displays current diffserv status
queue <DSCP (Hex)> <queue>
Maps a particular DSCP to a
queue
priority <DSCP (Hex)> <priority>
Maps a particular DSCP to a
802.1p priority
precedence <DSCP (Hex)> <precedence (Hex)>
Maps a particular DSCP to a
precedence
35.2.3 EXIT Command
Seitenansicht 231
1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 267 268

Kommentare zu diesen Handbüchern

Keine Kommentare