ZyXEL Communications Ethernet switch Betriebsanweisung PDF herunterladen (Seite 80)

Dimension ES-4024 Ethernet Switch

7-8 VLAN

Table 7-4 VLAN: Static VLAN

LABEL DESCRIPTION

ACTIVE Select this check box to activate the VLAN settings.

Name Enter a descriptive name for the VLAN group for identification purposes.

VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.

Port The port number identifies the port you are configuring. Ports 25 and 26 are the uplink ports.

Control Select Normal for the port to dynamically join this VLAN group using GVRP. This is the default

selection.

Select Fixed for the port to be a permanent member of this VLAN group.

Select Forbidden if you want to prohibit the port from joining this VLAN group.

Tagging Select TX Tagging if you want the port to tag all outgoing frames transmitted with this VLAN

Group ID.

Add Click Add to add the settings as a new entry in the summary table below.

Cancel Click Cancel to reset the fields.

Clear Click Clear to start configuring the screen again.

7.1.7 Viewing and Editing VLAN Settings

To view a summary of the VLAN configuration, scroll down to the summary table at the bottom of the Static

VLAN screen.

To change the settings of a rule, click a number in the Index field.

Figure 7-6 Static VLAN: Summary Table

The following table describes the labels in the summary table.

Table 7-5 Static VLAN: Summary Table

LABEL DESCRIPTION

VID This field displays the ID number of the VLAN group. Click the number to edit the VLAN settings.

Active This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).

Name This field displays the descriptive name for this VLAN group.

Delete Click Delete to remove the selected entry from the summary table.

Cancel Click Cancel to clear the Delete check boxes.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 267 268

Keine Kommentare

ZyXEL Communications Ethernet switch Betriebsanweisung Seite 80