Change the location and choose other radio channel to see whether the impact of the
interference decreases and the link quality improves.
What should I do if I have low signal or high noise ?
To improve the signal, check or get the antennas with reverse SMA type connectors. For noise
problems, please shield or remove the interference. If the situation doesn't improve, please
change radio channels.
Unable to associate to the access point
1. Verify that the PC card or PCI adapter is installed correctly.
2. Is the signal strength and link quality good ? Move closer to the access point to see if it
helps ? If not, you may have radio problems. Make sure you are in the wireless coverage
of your access point.
3. Temporarily disable the WLAN MAC Filter function on the access point. If this solves
the problem, check to make sure the MAC address of the wireless client is not contained
in the list of denied MAC addressed.
4. Temporarily disable any security feature on both the access point and the client. If this
solves the problem, check to make sure that the Wired Equivalent Privacy (WEP) key you
use to transmit data is set up exactly the same on your AP and on any wireless devices
with which it associates.
5. Make sure the configuration on access point and wireless consistent. Verify that the
configuration for the SSID on PC matches the access point's ESSID.
You can verify the result of association by using wireless client utility or entering command
"wlan association disp" in SMT Menu 24.8..
G3000H> wlan association disp
[NUM] MAC Address Association time
-------------------------------------------------------------
[001] 0x00:0x60:0xb3:0x69:0x03:0x37 00:00:02 2000/01/01 1
-------------------------------------------------------------
Total: 1
file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/trbst/Wireless%20Troubleshooting.htm (2 of 5)2005/7/15 下午 02:15:01
Kommentare zu diesen Handbüchern