ZyXEL Communications G-3000H Bedienungsanleitung PDF herunterladen (Seite 92)

IEEE 802.1x Access Control

Menu 23.2 - System Security - RADIUS Server

Authentication Server:

Active= Yes

Server Address= 220.130.46.196

Port #= 1812

Shared Secret= ********

Accounting Server:

Active= No

Server Address= 0.0.0.0

Port #= 1813

Shared Secret= ******

Press ENTER to Confirm or ESC to Cancel:

Option Descriptions

Active

Press [SPACE BAR] to select Yes and press [Enter] to enable 802.1x user authentication through an external RADIUS authentication

server. Select No to enable authentication using ZyXEL AP internal authentication server.

Server Address Enter the IP address of the external RADIUS authentication server.

Port

The default port of RADIUS server for authentication is 1812. You need not change this value unless your network administrator

instructs you to do so.

Shared Secret

Specify a password (up to 31 characters) as the key to be shared between external RADIUS authentication server and ZyXEL AP

(RADIUS client). The key is not send to the network. This key must be the same on the external RADIUS authentication server and

ZyXEL AP.

2. If accounting is required, you must setup the external RADIUS accounting server. Normally, RADIUS authentication server and RADIUS accounting server are

put in the same machine. However, they own separated UDP port and shared secret, you can separate authentication and accounting service in two different

RADIUS servers. You can refer to RADIUS authentication configuration.

If you use WEB Configuration,

1. From the Web Configurator main menu, go to Main Menu->WIRELESS->802.1x/WPA.

2. On the "Authentication Databases" field, choose "RADIUS Only" option, and click Active check box.

3. After you've done the settings, click Apply to make your setting work.

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/8021x.htm (13 of 27)2005/7/15 下午 02:14:56