
Chapter 11 RIP
P-663H-51 User’s Guide
102
The following table describes the labels in this screen.
Table 42 Advanced Setup > Routing > RIP
LABEL DESCRIPTION
Global RIP Mode Use these fields to turn RIP on or off for the whole ZyXEL Device. When you
disable RIP, the ZyXEL Device will not send any RIP packets and will ignore any
RIP packets received.
Interface This field displays the name of the WAN connection.
VPN/VCI The port (interface), VPI (Virtual Path Identifier) and VCI (Virtual Channel
Identifier) identify the ATM PVC (Permanent Virtual Circuit) to which these
settings apply. “LAN” appears for a bridged connection.
Version This field controls the format and the broadcasting method of the RIP packets
that the ZyXEL Device sends (it recognizes both formats when receiving). RIP-1
is universally supported but RIP-2 carries more information. RIP-1 is probably
adequate for most networks, unless you have an unusual network topology.
Operation RIP operation controls the sending and receiving of RIP packets. When set to
Active the ZyXEL Device periodically broadcasts its routing table . When set to
Passive, the ZyXEL Device uses the RIP information that it receives, but does
not broadcast its routing table.
Enabled Select or clear this field to turn RIP on or off for the interface.
Save/Apply Click this button to save the changes and have the ZyXEL Device start using
them.
Kommentare zu diesen Handbüchern