ZyXEL Communications P-663HN-51 Betriebsanweisung PDF herunterladen (Seite 93)

Chapter 9 Quality of Service (QoS)

P-663H-51 User’s Guide

Figure 50 Advanced > Quality of Service > Queue Configuration > Add

The following table describes the labels in this screen.

9.5 Class Setup

Click Advanced > Quality of Service > QoS Classification to open the following screen.

This screen lists the QoS classifiers. A classifier groups upstream traffic into data flows

according to specific criteria such as the source address, destination address, source port

number, destination port number or incoming interface. For example, you can configure a

classifier to select traffic from the same protocol port (such as Telnet) to form a flow. The

classifier also assigns a specific QoS queue, DSCP mark, and/or IEEE 802.1p tag.

Table 36 Advanced > Quality of Service > Queue Configuration > Add

LABEL DESCRIPTION

Queue

Configuration Status

Select Enable to turn on this queue.

Queue Select the WAN connection’s DSL port, Virtual Path Identifier, and Virtual

Channel Identifier.

Description This field displays any extra configured identification information.

Queue Precedence Set the queue’s priority relative to the other queues. The lower the number, the

higher the priority. 1 is the highest priority. 4 is the lowest.

Save/Apply Click this button to save the changes and have the ZyXEL Device start using

them.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 201 202

Keine Kommentare

ZyXEL Communications P-663HN-51 Betriebsanweisung Seite 93