ZyXEL Communications Prestige 623R-T Betriebsanweisung PDF herunterladen (Seite 6)

Prestige 623R-T ADSL Dual-link Router

ZyXEL Prestige 623R-T1 Quickstart Guide for IOL Broadband – Page 6

Preparing your ZyXEL Prestige 623 router for use

1. Plug the power adapter into a mains socket. Plug the other end into the socket marked “power” on the

rear of the router.

2. Connect one end of the supplied RJ11 telephone cable to the socket marked “DSL” on the rear of your

router and the other end to the socket marked “DSL/HPN” on your double-port ADSL microfilter, which

you connected to your phone line during microfilter installation.

3. Turn on the router by pressing the ‘power’ button on the back.

4. Check that the ‘PWR’ LED has come on to ensure that power is being supplied to the device.

5. After the router has completed its start-up procedures, the ‘PWR’ and ‘SYS’ lights on the front should

both be lit. (The SYS light will flicker at first while power-on self tests are performed.)

There is a button marked RESET at the rear of your P623. You will typically only need to

use this button if you’ve forgotten the Prestige’s password. It returns the Prestige to the

factory defaults (password is 1234, LAN IP address 192.168.1.1 etc. See the User’s Guide

(contained in Adobe Acrobat PDF format on the P623 CD) for more details.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Keine Kommentare

ZyXEL Communications Prestige 623R-T Betriebsanweisung Seite 6