Zyxel-communications Omni TA128 Bedienungsanleitung PDF herunterladen (Seite 27)

Type:

ATI1<Enter>

TA128 should respond:

TA128 USA: V 1.00a (Firmware version number)

7607 (Firmware checksum will change based on your firmware version)

Once the TA128 accepts the commands that you typed, it is ready

to be programmed and ready to operate with your ISDN network.

If you do not receive any response from the device, go over your

installation procedures again or contact ZyXEL Technical Support.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 172 173

Omni TA128 1
User’s Manual 1
ZyXEL Limited Warranty 2
FCC Part 15 Information 3
Contacting ZyXEL 5
Table of Contents 7
1 Introduction 13
Key Features of the TA128 14
Technical Specifications 15
Physical Characteristics 15
Unpacking Your TA128 16
2 Installing your TA128 17
U Interface Model 20
Power On and Self Diagnostics 21
TA128 Front Panel 22
Front Panel Switch 23
3 Configuring Your ISDN 25
AT<Enter> 26
ATI<Enter> 26
ATI1<Enter> 27
4 ISDN Communication 29
Supported AT command types: 30
Outgoing Calls 31
ATS83.7=1<enter> 32
ATS83.7=0 <enter> 32
ATDA17146930762<enter> 32
ATDB17146930762<enter> 32
Incoming Calls 33
Digital Data 34
Determining the Packet Length 34
Answering a Call using MSN 35
Data over Speech Channel 36
Best-effort call answering 37
5 Setup for Windows 95 39
Networking 43
CAPI Installation 47
6 Point-to-Point Protocol 49
Feature list 50
Authentication conversion 51
Multilink PPP 52
Call bumping 53
Bandwidth On Demand (BOD) 54
BACP/BAP 54
7 V.110 and Synchronous 57
Making V.110 Calls 58
Synchronous Connections 58
V.25bis Command Set 59
DTR Drop-Dialing Operation 60
8 V.120 ISDN 63
Configuring the V.120 mode 64
Answering incoming calls 65
Speeds of 128Kbps 66
9 X.75 ISDN 71
Answering an X.75 call 72
Making an X.75 Call 72
10 Handling Analog Calls 77
Accepting an Incoming Call 79
Feature Phone 81
InterCom 82
Call Waiting 82
Placing a second call 82
Receiving a second call 82
Call Broker 83
Call Reject 83
Call Transfer 84
Three-way Conference Call 84
11 Advanced ISDN Call 86
AT&ZOx=s. The 88
Answering a Call 92
Answering a Call for 1TR6 93
Best-effort Call Answering 94
Data Call Indication 95
Placing a Call 96
Placing a call for DSS1 97
Leased Line ISDN 98
12 Security Functions 100
Level 1 security 101
Level 2 security 101
Level 3 security 101
AT*HCn=xxxx, - n=0,1,..,4 104
13 Upgrading Your TA128 106
Kernel Mode 107
14 DTE Port 2 108
Configuring DTE Port 2 109
Setting of DTE port 2 Speed 114
DTE Port 2 Call Control 115
15 Diagnostics 116
The Diagnostic Command (ATCG) 118
Resetting The TA128 119
Capturing the Protocol Data 120
Analyzing the Captured Data 121
16 AT Command Set 124
AT Command Descriptions 125
Description of ATI3 Output: 133
17 Status Registers and 142
Setting S-registers 143
S-Register Descriptions 145
ATS35.7=1<enter> 167
18 Phone Jack Pinout 168
4. Not Connected 169
19 Serial Port Interface 170
65-020-128006 173
ZyXELZyXEL Communications Co 173

Kommentare zu diesen Handbüchern

Keine Kommentare

Zyxel-communications Omni TA128 Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Zyxel-communications Omni TA128