Zyxel-communications Omni TA128 Bedienungsanleitung PDF herunterladen (Seite 82)

InterCom

With two phones connected, your TA128 can be used as an

intercom. Please follow the instructions below:

1. Pick up the telephone handset.

2. Press the Flash key and then press 2 on the phone keypad. The

other local phone will start to ring.

InterCom: ( ñ è H Flash è H #2

Call Waiting

The call waiting feature enables you to place a call on hold by

pressing the Flash key. If you press the Flash key again, the call

waiting function will be disabled and return to the previous call.

Call Waiting: H Flash

Placing a second call

When you have an active call on line, you may follow the

procedures below to make a second call:

1. Place the current call on hold by pressing the Flash key and 0.

2. Dial the phone number of the second party and wait for them

to answer.

Making a second call: H Flash è H #0 è H

Receiving a second call

If call waiting has been enabled, you will receive a signal through

the handset whenever a call is trying to come in while you are on-

line. To enable the call waiting function, use the AT Commands in

the table below:

AT Commands Description

ATS79.2=0 Disables call waiting for POTS port 1.

ATS79.2=1 Enables call waiting for POTS port 1(Default).

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 172 173

Keine Kommentare

Zyxel-communications Omni TA128 Bedienungsanleitung Seite 82