Zyxel-communications Omni TA128 Bedienungsanleitung PDF herunterladen (Seite 64)

support out-of-band signaling, network signals are transmitted

through the B channels. This reduces the bandwidth to 56Kbps.

When you are making a V.120 call, make sure that the

communication supports out-of-band signaling. If it does not

support out-of-band signaling, you will need to set your TA128 to

56K mode using the AT&E1 command (AT&E0 to set it back to

64k mode.) If your TA128 is on the receiving end, you can keep the

setting at AT&E0, 64k data mode. The TA128 will automatically

switch between the two speeds in answer mode.

Configuring the V.120 mode

To configure for a 56K V.120 call, type:

ATB20<Enter> (Select V.120 for communication)

TA128 responds:

Type:

AT&E1<Enter> (Select 56K data mode)

TA128 responds:

Now you are ready to dial the phone number. If you need to save

the setting into non-volatile RAM, issue the commands:

Type:

AT&W0<Enter> (Save the settings to profile 0) [Profiles available: 0-

TA128 responds:

Type:

ATZ0<Enter> (Save stored settings as the power on settings to profile

0) [Profiles available: 0-3]

TA128 responds:

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 172 173

Keine Kommentare

Zyxel-communications Omni TA128 Bedienungsanleitung Seite 64