ZyXEL Communications G-102 Betriebsanweisung Seite 104

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 198
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 103
ZyXEL G-1000 v2 User’s Guide
104 Chapter 12 LAN Setup
Figure 52 Menu 3.5 Wireless LAN Setup
3 Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR]
to select Yes and then press [ENTER]. Menu 3.5.2 – Roaming Configuration
displays as shown next.
Figure 53 WLAN Roaming Configuration
The following table describes the fields in this menu.
Menu 3.5 - Wireless LAN Setup
ESSID= ZyXEL
Hide ESSID= No
Channel ID= CH06 2437MHz Edit MAC Address Filter= No
RTS Threshold= 2432 Edit Roaming Configuration= Yes
Frag. Threshold= 2432 Breathing LED= No
WEP Encryption= 64-bit WEP
Default Key= 1 802.11 Mode= Mixed
Key1= ******** Output Power= 17 dBm
Key2= ******** Block Intra-BSS Traffic= No
Key3= ********
Key4= ********
Authen. Method= Auto
Press ENTER to Confirm or ESC to Cancel:
Menu 3.5.2 - Roaming Configuration
Active= Yes
Port #= 3517
Table 44 Menu 3.5.4 Bridge Link Configuration
FIELD DESCRIPTION
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the
G-1000 v2 if you have two or more G-1000 v2s on the same subnet.
Port # Type the port number to communicate roaming information between access
points. The port number must be the same on all access points. The default is
3517. Make sure this port is not used by other services.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Seitenansicht 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 197 198

Kommentare zu diesen Handbüchern

Keine Kommentare