ZyXEL Communications G-102 Betriebsanweisung PDF herunterladen (Seite 62)

ZyXEL G-1000 v2 User’s Guide

62 Chapter 4 Wireless LAN

The following table describes the labels in this screen.

Table 22 Wireless LAN: Advanced

LABEL DESCRIPTION

Roaming Configuration

Enable

Roaming

Select this checkbox to enable roaming on the G-1000 v2 if you have two or more G-

1000 v2s on the same subnet.

Note: All APs on the same subnet and the wireless stations must

have the same SSID to allow roaming.

Port Enter the port number to communicate roaming information between APs. The port

number must be the same on all APs. The default is 3517. Make sure this port is not

used by other services.

Wireless Advanced Setup

RTS/CTS

Threshold

Enter a value between 0 and 2432. If you select the Enable 802.11g+ mode

checkbox, this field is grayed out and the G-1000 v2 uses 4096 automatically.

Fragmentation

Threshold

It is the maximum data fragment size that can be sent. Enter a value between 256 and

2432. If you select the Enable 802.11g+ mode checkbox, this field is grayed out and

the G-1000 v2 uses 4096 automatically.

Enable Intra-

BSS Traffic

Intra-BSS traffic is traffic between wireless stations in the BSS (Basic Service Set).

Select this check box to enable Intra-BSS Traffic.

Enable

Breathing LED

Select this check box to enable the Breathing LED, also known as the ZyAIR LED.

The blue ZyAIR LED is on when the G-1000 v2 is on and blinks (or breaths) when

data is being transmitted to/from its wireless stations.

Clear the check box to turn this LED off even when the G-1000 v2 is on and data is

being transmitted/received.

Number of

Wireless

Stations

Allowed

Enter a number from 1 to 32, to limit the number of wireless devices which can

communicate in your wireless network.

802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to

associate with the G-1000 v2.

Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to

associate with the G-1000 v2.

Select Mixed to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices

to associate with the G-1000 v2. The transmission rate of your G-1000 v2 might be

reduced.

Apply Click Apply to save your changes back to the G-1000 v2.

Reset Click Reset to reload the previous configuration for this screen.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 197 198

Kommentare zu diesen Handbüchern

Keine Kommentare

ZyXEL Communications G-102 Betriebsanweisung Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung ZyXEL Communications G-102