ZyXEL Communications G-102 Betriebsanweisung Seite 76

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 198
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 75
ZyXEL G-1000 v2 User’s Guide
76 Chapter 7 System
Figure 30 System General Setup
The following table describes the labels in this screen.
Table 30 System General Setup
LABEL DESCRIPTION
System Setup
System Name Enter a name to help you identify your ISP on the network. This is not a required
field and you can safely leave this field blank.
Domain Name Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Administrator
Inactivity Timer
Type how many minutes a management session (either via the web configurator or
CLI (Command Line Interpreter)) can be left idle before the session times out. The
default is 5 minutes. After it times out you have to log in with your password again.
Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Password Setup
User Password Type your current password. The default password is 1234.
New Password
Type your new password (up to 30 characters). Note that as you type a password,
the screen displays a (*) for each character you type. After you change the
password, use the new password to access the G-1000 v2.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes back to the G-1000 v2.
Cancel Click Cancel to begin configuring this screen afresh.
Seitenansicht 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 197 198

Kommentare zu diesen Handbüchern

Keine Kommentare